Worksite Hazard Assessment
OSHA’s Personal Protective Equipment Standard requires employers to assess the workplace to determine if hazards are
present that necessitate the use of PPE. Based on the assessment, appropriate PPE must be selected and provided to
affected employees.
Using Subpart I Appendix B as a guide, develop a hazard assessment for your workplace or a workplace you are familiar
with. If you work in an office or other non-hazardous location, develop an assessment for an imagined industrial shop,
such as woodworking or metalworking. Use the other sections of Subpart I to help determine the appropriate PPE for
each hazard. You can also use online safety equipment catalogs to find examples of PPE that meets the OSHA
requirements.
Your submission must be a minimum of two pages. References and citations in APA format should be provided to support
the hazard determinations and PPE selection. The reference page does not count towards the two page minimum.
Subpart I Appendix B is located at the following link:
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10120

 
For a custom paper on the above topic or any other topic, place your order now!
What Awaits you:
On-time delivery guarantee
Masters and PhD-level writers
Automatic plagiarism check
100% Privacy and Confidentiality
High Quality custom-written papers