Tasks
Write a report that describes each of the following eight tasks for the scenario described in Appendix 1- “ Replacing single glazed windows with double glazed windows”. Justify and support your
descriptions with references to recognised sources.

Identify and describe the hazard categories you would recommend Renovabuild to use to help them identify all hazards that pose a risk to health and safety of workers in their Renovation projects.
Describe when hazard identification needs to be conducted for the Renovation projects (you can use the project described in Appendix 1 as an example).
Describe how Renovabuild should organise hazard identification for the Renovation project department and renovation projects (e.g. for tasks and areas, who should be responsible and who should be
involved).
Identify the hazard identification methods Renovabuild’s Renovation project department should use related to the renovation project described in Appendix 1 and when the methods need to be used.
To illustrate how the hazard identification methods should be used, you should use the appropriate ones to identify hazards in relation to installing windows at the second floor. Describe the
methods and the identified hazards.
Describe a method for identifying the hazard with the highest risk (assessment of risk) and describe the hazard you have assessed to pose the highest risk for the process described under point 5
above and describe the likely consequences.
Describe the hierarchy of controls and apply it to the hazard you identified in point 6 to pose the highest risk. Describe the control measures you have identified on each level of the hierarchy of
controls.
Describe Renovabuild’s, and its contractors (as mentioned in Appendix 1), duties in relation to risk management for the renovation project described in Appendix 1. Describe how the duties should be
distributed in relation to identification of hazards and controls of hazards. Be as specific as you can.
Justify your descriptions for each of the tasks, taking into account the three positions on risk management described in Modules 3 and 4. You are required to support your identification, assessment
and suggested controls of hazard with references to recognised materials such as regulations, approved codes of practices and guidelines.