Description
Design a tube bank that will increase the temperature of a 1200 CFM flow of air from 350F to 1000F. Assume a constant pressure of 1atm. Each tube will have a diameter of 0.5in and a length of
24in. The tube configuration must fit in an area of 18in by 18in. Assume reasonable uniform surface temperature for the outside of the tubes. Finding will be presented in a report with a memo cover
sheet. A narrative including an Introduction, Analysis Methods, Results, and Conclusions needs to be provided. Introduction: Describe the problem Analysis Methods: Describe the methods used to
analyze the problem. Include equations used and any other tools used. Results: Provide a dimensioned drawing of the design along with any results obtained from calculations or other analysis
methods.